| Color Case Hardening |
|
|
|
| Written by Dan Printz | |
| Sunday, 01 January 2012 | |
|
Case Color Hardening or Color Case Hardening: The Firing Pin, L.L.C. uses traditional (w/Bone and Wood Charcoal) to accomplish this task. Case Color Hardening has been around for centuries, however it is not known for how long. We do know that by Case Color Hardening a receiver or frame you get beautiful colors! A good Case Color Hardening can result in beautiful molten blues, greens, browns, purples, reds, and even grays. The colors themselves are perishable both from direct sun light and wear. I would recommend that you don't handle it roughly and that you don't leave it exposed in direct sunlight for extended periods of time, therefore, I offer a protective finish with a limited life time warranty either in glossy or satin finish. The Firing Pin, L.L.C. only uses traditional (w/Bone and Wood Charcoal), and is an extensive process to under take to obtain beautiful colors. Color Case Hardening can be done on single and double barrel shotgun receivers, and some lever action rifles. Also other parts can be Case Colored as well such as levers, screws, trigger guards etc. All or some of these task may be involved. To see more pictures of the Winchester Model 94 that I Color Case Hardened for Mr. Jeff Quinn go to www.gunblast.com
Warning: Due to the high temperatures involved warping may be an issue. Therefore I will only Color Case Harden one time. The Firing Pin, LLC does everything possible to avoid warping, and only if you send the complete firearm can I guarantee final fitting.
Some or all of these procedures may be used. * Complete dis-assembly and inspection of weapon. * Complete cleaning of weapon. * Annealing of parts. * Lightly Bead blast. * Hand polish. * Removal of oil and polish. * Wipe with acetone. * Packing the parts in a crucible. (w/Bone & Wood Charcoal). * The parts are then fired to a preset temperature. * Quenched in water. * Rinse thoroughly with boiling hot-water rinse. * Re-Firing to a lower temperature. * Apply oil or H. Behlen either glossy or satin finish to maintain the beautiful colors. * Reassembly. * Functional test. * Test fire. (If applicable)
I require 50% upfront and the rest of the payment before shipment of the firearm.
PRIVACY POLICY The Firing Pin, L.L.C. maintains all client information in the strictest confidence and will never sell or transmit client information to third party solicitors.
Effective March 1st. 2013 there will be an additional 4% charge to use credit cards.
Happy Shooting! |
|
| Last Updated ( Wednesday, 06 March 2013 ) |
| < Prev | Next > |
|---|



